Lin L.Z., Dai S.T., Qiu M., Xiao L.Y., Wang Z.K., Li X.H., Zhang G.M., Song N.H., Zhang J.Y., Zhang D., Zhang Z.F., Du X.J., Zhang F.Y., Zhou W.W.
Ключевые слова: MgB2, wires multifilamentary, critical caracteristics, critical current, temperature dependence, quench propagation, minimum quench energy, MRI magnets, design parameters, fabrication, stability, thermal conductivity, resistance, heat capacity, current-voltage characteristics, experimental results
Ключевые слова: HTS, coated conductors, buffer layers, IBAD process, fabrication, texture
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Peng Y., Liu S., Sahu A.K., Cheng Y., Ding K., Lu K., Shen G.
Ключевые слова: ITER, magnets, coils toroidal, LTS, NbTi, HTS, current leads, design, design parameters, feeder
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Cheng Y., Ding K., Lu K., Shen G., Rodriguez-Mateos F., Sahu A.
Ключевые слова: ITER, magnets, design parameters, cryogenic systems, feeder
Mitchell N., Bi Y., Bauer P., Wang Z., Zhou T., Devred A., Song Y., Huang X., Liu C., Zhang H., Cheng Y., Ding K., Shen G., Sahu A., Cheng A., Lin X., Yu J.
Ключевые слова: HTS, current leads, ITER, Bi2223, tapes, test results, design parameters, current sharing, critical caracteristics, critical current, magnetic field dependence
Ключевые слова: HTS, coated conductors, IBAD process, fabrication, buffer layers, microstructure
Ключевые слова: HTS, coated conductors, substrate Hastelloy, surface, roughness, IBAD process, fabrication
Ключевые слова: HTS, YBCO, bulk, doping effect, fabrication, composition, critical current density, Jc/B curves, microstructure, experimental results, critical caracteristics
Wang Z., Noguchi S., Yoshizawa M., Ishida T., Harada Y., Shimakage H., Kuribayashi A., Miki S., Satoh K., Yotsuya T.
Ключевые слова: SMES, control systems, FCL, coils, modeling, hybrid systems, power equipment
Ключевые слова: SMES, hybrid systems, LTS, NbTi, prototype, FCL three-phase, test results, power equipment
Ключевые слова: SMES, HTS, Bi2223, tapes, coils pancake, design parameters, conduction cooled systems, power equipment
Lin L.Z., Dai S.T., Xiao L.Y., Wang Z.K., Zhang J.Y., Zhao C.H., Zhang D.(zd@mail.iee.ac.cn), Du X.J., Zhang F.Y.
Ключевые слова: SMES, design parameters, numerical analysis, LTS, NbTi, magnetic systems, model small-scale, power equipment
Ключевые слова: HTS, coated conductors, substrate Hastelloy, IBAD process, buffer layers, coatings, chemical solution deposition, microstructure, texture, fabrication
Lin L.Z., Dai S.T., Guan Y., Hui D., Xiao L.Y., Li H.D., Zhu Z.Q., Wang Z.K., Gong L.H., Xu X.D., Li L.F., Zhang J.Y., Zhang D., Zhao C.H., Zhang Z.F., Lu J.Z., Fang Z., Zhang H.X., Zeng J.P., Li G.P., Zhou S.Z.
Ключевые слова: FCL rectifier type, HTS, Bi2223/Ag, tapes, coils, test long-term operation, power equipment
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.